Bluetooth is ideal to rock in the car or talk with your hands free, but sometimes making it work feels like pulling out blue teeth. There may be pairing problems, dark error codes or wholly useless blinking lights and that can be very frustrating. Put your Bluetooth devices into operation with these tips Fix Bluetooth Pairing Problems.
Bluetooth technology is not new. Tired of cables and wired devices, we quickly took advantage of the possibility that the devices could get rid of the cables and work wirelessly. But every technology has its flaws and Bluetooth can have some problems that can also be solved easily. If your Android phone does not connect or pair with Bluetooth and you are looking for solutions to fix it, we have some tips for you. We will identify the reasons for the Bluetooth problems and we will see the solutions that can help you solve the problem.
Fix Bluetooth Pairing Problems
- Make sure that Bluetooth is turned on. You should see the small Bluetooth symbol at the top of your phone’s screen. If you do not, go to the configuration to enable it.
- Determine which pairing process your device uses. The process for matching devices may vary. Sometimes, for example, it involves entering a code in your phone. Other times, you can physically touch the phone with the device with which you want to pair it. Or in the case of Bose SoundLink, just press and hold a button on the speaker to pair it with a phone. If you are not sure how to link a device, see the user guide; Usually, you can find one by searching online.
- Turn on the visible mode. Let’s say you want to pair your phone with your car’s entertainment and information system so you can enjoy calls, text messages and hands-free navigation. First, enter the settings of your phone and tap Bluetooth; By doing so, the phone is visible to the car. Then press the buttons on your car’s infotainment system, usually on the steering wheel or in the center column, to find the device. Once you find your phone, the car can request a numeric code that you need to confirm or enter into your phone. After doing so, the devices must be paired. Keep in mind that your phone or your car can only remain in visible mode for a few minutes; If it takes too long, you should start over.
- Make sure the two devices are close enough to each other. While you would not think someone would try to pair an iPad with a keyboard if the two were not sitting next to each other, you probably need to be aware that you must make sure that all the devices you are trying to pair are within five feet. from one to the other
- Turn off the devices and turn them on again. A soft reset can sometimes solve a problem. With telephones, an easy way to do that is to get in and out of airplane mode.
- Turn off possible sources of interference. Say that the faithful Bluetooth speaker usually connects to your companion’s smartphone instead of yours. If you have trouble synchronizing your phone with the speaker, it could be because the speaker is trying to activate your usual connection. Some older devices are very simple. They just try to connect with the latter with what they matched. If a Bluetooth device was previously paired with something else, disable that other gadget.
- Load the two devices you are trying to pair. Some devices have smart power management that can turn off Bluetooth if the battery level is too low. If your phone is not synchronized, make sure that the device you are trying to synchronize with has sufficient capacity.
- Remove a device from a phone and rediscover it. If your phone sees a device but does not receive data from it, sometimes it helps to start from scratch. In the iOS settings, you can delete a device by touching its name and then Forget this device. In the Android settings, tap the name of a device, then Unlink. After removing a device, start at step 1 of this list.
- Get away from the wifi router. Another potential obstacle to successful pairing is the interference of devices that use the same spectrum, such as your Wi-Fi router. “Wi-Fi has been designed to deal with this, but it may not be a good idea to have your devices directly on top of the router,” says Powell.
- Move away from a USB 3.0 port. “USB 3.0 interference is also possible,” says Powell. Newer laptops, for example, often have the faster USB 3.0 port, so if the connection is not made, try to pair your Bluetooth devices with the computer.
- Make sure that the devices you want to pair are designed to connect with each other. Whether it’s a headset, a speaker, a mouse, a keyboard, a camera or something else, your device has a specific profile that explains what it can connect to. If you are not sure, consult the user manual.
- Download a driver. If you have trouble matching something with your PC, you may not have the correct driver. The easiest way to solve this is to do an online search for the name of the device you are trying to link together with the word “driver”.
- Update the hardware firmware. It is known that some automotive audio systems are not paired with phones because the Bluetooth drivers of these systems do not work with Bluetooth 4.0. If you are not sure how to obtain the latest firmware for your hardware, check with the manufacturer of the device.
- Limit shared data between devices. Android and Windows devices allow you to choose the information you share between devices. For example, you can choose to share your phone’s audio, multimedia audio, contacts, and text messages with your car. If you do not need to share all the data, deselecting one or more of the types of information can allow the devices to pair. For Android devices, go to Settings> Bluetooth and select the device. If there are options to select, they will appear. For Windows, go to Control Panel> Hardware and Sound> Devices and Printers and right click on the Bluetooth device in question. Then, select the Services tab to choose what types of information to share.
- Clear the Blutooth cache (Android only). Sometimes, applications interfere with Bluetooth operation and clearing the cache can solve the problem. Go to Settings> Backup and restart> Reset network settings.